Clutch
- Make
- Fiat
- Model
- Punto (176) Factory Service Manual
- Year
- 1993–1999
- Section
- Electrical equipment ('97 range) › Clutch
00 Introduction and technical dataClutch
| Code | Description |
|---|---|
| 1806149001 | FLOWTRONIC tester for checking fuel consumption |
| 1850193000 | Spanner for spark plugs |
| 1860183000 | Pliers (∅ 75-110) for removing and re-fitting piston circlips |
| 1860313000 | Drift for fitting oil seal on valve guides |
| 1860395000 | Drift for removing valve guides |
| 1860470000 | Cylinder head retaining tool during over-haul |
| 1860490000 | Valve leakage test equipment 1895868000 (to be used with 1860470000)) |
| 1860592000 | Universal hook for lifting and moving engine-gearbox unit |
| 1860700000 | Band (∅60 ÷ 125 mm) for fitting normal and oversize pistons in cylinders |
| 1860744000 | Tool for rotating crankshaft (at the bench) |
| 1860790000 | Tool for removing springs, caps, cotters and valves (to be used with 1860786000, 1860787000, 1860788000 and 1860877000) |
| 1860815000 | Adaptor for rotating crankshaft |
| 1860831000 | Spanner for timing pulley |
| 1860834000 | Spanner for camshaft housing fixing bolts |
| 1860846000 | Flywheel lock (operations at the bench) |
| 1860877000 | Tool for removing and refitting cotters, caps, springs and valves |
| 1860879000 | Universal handle |
| 1860881000 | Tool for fitting crankshaft rear cover gas-ket |
| 1860942000 | Goniometer for angular tightenings |
| 1860955000 | Equipment for checking fuel supply cir-cuit |
| 1860985000 | Tools for timing and locking camshafts |
| 1860986000 | Tool for removing and fitting gudgeon pin |
| 1860987000 | Tool for tensioning timing belt |
| 1860988000 | Tool for retaining tappets |
| 1860990000 | Tool for fitting crankshaft and camshaft front cover oil seals |
| 1860992000 | Tools for positioning pistons in line |
| 1860993000 | Tool for fitting valve guide oil seals |
| 1860994000 | Tool for removing-refitting valve guides |
| 1861001032 | Bracket to secure engine (timing side) on rotating stand 1861000000 |
| 1861001034 | Bracket to secure engine (flywheel side) on rotating stand 1861000000 |
| 1895615000 | Tool to check piston pin unseating load (to be used with 1895884000 |
| 1895762000 | Dynamometer to check V and poly-V belt tension |
| 1895868000 | Valve leakage test equipment |
| 1895881000 | Dial gauge |
CLUTCH
| Code | Description |
|---|---|
| 1875086000 | Guide pin for centering clutch disc |
Parts & tools for this job For 1993 Fiat Punto
- PARTClutch kitSearch: Fiat Punto 1993 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Fiat Punto manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.