Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)02 · 10 Engine
02 · Engine

Components of fuel pump assembly

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Fuel system (1108, 1242 SPI) › Components of fuel pump assembly
10 EngineComponents of fuel pump assembly · page 1 of 2
Diagram of the fuel pump assembly showing numbered components including the retaining plate, electric fuel pump, mesh prefilter, delivery line, return line, gasket, and fuel level gauge sender unit.

Components of fuel pump assembly

1 – Retaining plate

2 – Electric fuel pump

3 – Mesh prefilter

4 – Delivery line

5 – Return line

6 – Gasket

7 – Fuel level gauge sender unit

REMOVING-REFITTING FUEL FILTER

Illustrations showing the vehicle raised on a lift, the location of the fuel filter under the car, the removal of hoses using clips, and the detached fuel filter with flow direction arrows.
  • Raise the vehicle
  • Unscrew screw retaining filter to support bracket
  • Remove clips holding fuel hoses to filter
  • Collect fuel emerging during the operation in a suitable container

The fuel filter must be replaced at intervals of 30,000 km.

NOTE The filter MUST NEVER BE OVERTURNED, otherwise it must be replaced (even after only a short period of operation) The arrow stamped on the outer case indicates the fuel flow direction.

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.