Removing-refitting power steering pump

REMOVING-REFITTING POWER STEERING PUMP

Place the car on ramps, disconnect the battery's negative lead, then proceed as described below:

1. Remove the complete filter casing by undoing the nuts and clip indicated.
2. Remove the resonator complete with air intake duct by disconnecting the clip (arrowed) from the throttle body and undoing the attachment screws. Also disconnect the oil vapour recovery pipe from the bottom of the resonator.
3. Drain the power steering fluid from the reservoir.
4. Disconnect the pressurized fluid delivery pipe (1) from the power steering pump, and the fluid inlet pipe (2) from the reservoir. Collect the fluid still present in the system.