Compressor (page 2 of 2)

1. Loosen the front alternator fixing bolt and the micro-metric tensioning screw for the timing drive belt.
2. Loosen the rear alternator fixing bolt. Move the alternator aside and remove the timing drive belt from the air conditioning compressor pulley.
3. Disconnect the connector for the evaporator/compressor connecting pipe from the compressor. Then remove the actual pipe (the evaporator connector was disconnected previously).
4. Disconnect the connector for the compressor/condenser connecting pipe from the compressor. Also disconnect the compressor supply connector.
5. Loosen the power assisted steering pump drive belt tension acting on the bolts shown in the diagram; then remove the belt from the damper flywheel.

Original page

View full sizeFit to page