Component identification

Component identification

A. dual relay B. fuse protecting injection-ignition ECU C. Fiat CODE system fuse D. pulse generator connection for speedometer signal E. relay controlling radiator cooling fan (only for cars with heater) F. lambda probe fuse G. ABS system fuse H. Intake air pressure sensor Check components for faults or damage and replace if necessary.

Removing-refitting intake air pressure sensor

- Disconnect electrical connection (1), undo retaining nuts indicated and remove the sensor from the mount. Disconnect pipe (2) connecting to the intake manifold and remove the sensor from the engine bay. - to refit, carry out removal instructions in reverse order and ensure the intake manifold connection pipe and electrical connection are correctly positioned.

MAXI-FUSE BOX FUSES

Fuse identification

A. 40A fuse (IGN) for ignition system B. 30A fuse (EFI) for injection system C. 50A fuse (J/B2) for supplementary options D. 80A fuse (J/B1) for junction unit E. 40A fuse for ABS system F. 30A fuse for supplementary fan system G. 30A fuse (40A) for radiator fan system (*) for versions with climate control system Remove cover (2) from mounts (1) and cover (3) from base (4) to gain access to the MAXI-FUSE fuses. Check components for damage or faults and replace if necessary.