Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)09 · 55 Electrical system
09 · Electrical

Starter

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Starter › Starter
55 Electrical systemStarter · page 1 of 2

Starter

A person holding a starter motor assembly, showing the front end bracket and stator casing being separated.

P3M068L01

Dismantling front end bracket from the stator casing

Stator: conduct continuity and earth insulation tests on the stator.
Rotor: continuity, short circuit and earth insulation tests.

A close-up view of a tool being used to remove tie bolts securing the front bracket to the rear bracket of a starter motor.

P3M066L02

Dismantling tie bolts securing front bracket to rear bracket, and securing reduction gear

A hand using a long tool to remove the epicyclic reduction gear assembly from the starter motor housing. A callout number 1 points to the gear.

P3M066L03

Removing epicyclic reduction gear assembly

The epicyclic reduction gear is supplied as a spare part in the form of an assembly, since it cannot be overhauled. Renew it if operating faults are discovered (noise, jamming, etc.).

  1. Epicyclic reduction gear assembly

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.