Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)09 · 55 Electrical system
09 · Electrical

Removing-refitting rear window washer spray jet

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Various devices › Removing-refitting rear window washer spray jet
55 Electrical systemRemoving-refitting rear window washer spray jet · page 1 of 2
Two views of a windscreen wiper arm attachment point with arrows indicating the release mechanism
A windscreen wiper arm and blade assembly

P3M086L03

  • lift off the attachment cover;
  • undo the screw indicated, then remove the windscreen wiper arm;
A hand using a tool to disconnect an electrical connector and a pipe from the rear window wiper motor assembly
The rear window wiper motor assembly showing attachment points and connections

P3M086L05

  • undo the attachment screws, disconnect the connector and rear window washer pipe, then remove the rear window wiper motor.

NOTE To refit, reverse the procedure for removal.

Close-up of the rear window wiper motor showing a spring retaining clip being removed with a tool
A rear window washer spray jet with its flexible tube

Removing-refitting rear window washer spray jet

After removing the rear window wiper motor, remove the spring retaining clip and the spray jet.

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.