Removing-refitting electric window

REMOVING-REFITTING ELECTRIC WINDOW

Remove the inner lining as described on pages 1 - 4 of section 70 Bodywork in the Punto Cabrio manual (print no. 506.003/02), then proceed as described below.

NOTE Place the window in the closed position.

1. Partly unstick the plastic protection.
2. Remove the fixing band and disconnect the connector from the electric window motor.
3. Undo the nuts fixing the electric window device to the bodyshell.
4. Move the outer glass scraper trim aside.
5. Extract the device complete with window.

NOTE To refit suitably reverse the operations carried out for the removal.