Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)10 · 70 Bodywork
10 · Body & interior

Removing-refitting outer door handle

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Front door › Removing-refitting outer door handle
70 BodyworkRemoving-refitting outer door handle
Internal view of the door panel showing the window glass guide mechanism and internal components.

REMOVING-REFITTING OUTER DOOR HANDLE

Order of operations

  • Remove the door panel and protective cover following the instructions given on page 1;

NOTE Before removing the panel, ensure that the window glass is in the end of travel position (top).

  • loosen the bolt shown, then remove the left guide for the window glass;
Vertical section of the door edge showing the internal structure.
Close-up of the exterior door handle assembly with arrows indicating the direction of removal or adjustment.

P3M005M02

Isolated view of the removed exterior door handle component.

P3M005M03

  • loosen the bolts fixing the exterior handle to the door, then remove it.
Long horizontal view of the internal door frame or reinforcement bar.
The exterior door handle and a small circular cap or plug placed on a surface.

P3M005M04

  • when refitting, simply reverse the order of the operations carried out for the removal.

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.