Refitting

Refitting

• Place the window complete with window opening guide in the rear wing housing;
• fit the adjustment pins between the window opening and the bodyshell;
• ensure that there is a distance of about 10 mm between the window opening and the bodyshell and the lower adjustment pins, then tighten the appropriate nuts;

• place the window in the closed position;
• check that the distance between the window and the edge of the wing, at the height of the seat belts, is between 8 and 9 mm taking the serigraphy shown in the diagram as a reference point;

• place the hood and the window in the closed position;
• check that the profile and the distances are between 3 and 6 mm between the front window and the rear window seal;

See page 48 for the relevant adjustments.

• complete the refitting by suitably reversing the order of the operations carried out for the removal.