Gearbox and differential (page 2 of 2)
- Make
- Fiat
- Model
- Scudo Factory Service Manual
- Year
- 1996–2006
- Section
- Gearbox and differential
00 Introduction and technical dataGearbox and differential · page 2 of 2
Values in mm
| GEARBOX - DIFFERENTIAL | Type | BE 3 - 5 | ME 5K | ML-5T | |
|---|---|---|---|---|---|
| Axial clearance of hub for 1st - 2nd gear sliding engagement sleeve | Axial clearance | - | ≤0.05 | - | |
| Adjustment | - | 1.37-1.67 (0.03) |
- | ||
| Main shaft bearing backlash | Axial clearance | 0.08-0.12 | 0.05-0.15 | - | |
| Adjustment | 0.7-2.4 (0.1) |
0.20-0.60 (0.05) |
- | ||
| Differential housing bearings | type | taper roller bearings | |||
| Preload | 0.1 If flange thickness=8.65 |
0.15 | - | ||
| Preload adjustment | - | - | - | ||
| Differential gears-planet gears | Clearance | - | 0.10 | - | |
| Clearance adjustment | - | 1.52-1.82 (0.06) |
- | ||
Parts & tools for this job For 1996 Fiat Scudo
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.