Removing-refitting
- Make
- Fiat
- Model
- Scudo Factory Service Manual
- Year
- 1996–2006
- Section
- Fuel system (1868 D, 1905 D, 1905 TD) › Removing-refitting
10 EngineRemoving-refitting
For the operations listed below, refer to the supplement to the Ulysse Volume 1 manual relating to Sec. 10 of the 1905 TD engine (Publication no. 506.407/04)
REMOVING-REFITTING
FUEL SYSTEM
- Fuel injection pump
- Automatic fast idle (TLA)
- Device for excluding fuel injection advance retarder at low load ALFB
- Flow rate limiter
- Heater plug control device
- Wiring diagram of heater plug and EGR circuit
- Burnt gas recirculation system (EGR)
- Functional diagram of EGR system
- EGR valve
- Drive solenoid
- Diagram of fuel system
- Oil vapour recirculation system
- Checks and adjustments
TURBOCHARGING SYSTEM
- Turbocharging with exhaust gas driven turbo-compressor
LUBRICATION
- Oil-coolant heat exchanger
Parts & tools for this job For 1996 Fiat Scudo
- PARTFuel filterSearch: Fiat Scudo 1996 fuel filter
- TOOLFuel pressure test kitSearch: fuel pressure test kit
- TOOLFuel line disconnect toolSearch: fuel line disconnect tool
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.