FLEXIBLE PIPE TO REAR BRAKE CALIPERS

Operation 3330E30 · HYDRAULIC BRAKE SYSTEM PIPES

Removing

- Position the vehicle on a lift.

1. Unscrew the connector to the intermediate hose.

2. Recover the clip.

- Collect the coolant in a suitable container.

1. Undo the connector on the rear brke caliper.

2. Release the flexible pipe from the fastenings on the rear axle and remove it.

Refitting

- Position the flexible pipe and secure it to the special fastenings on the rear axle.

- Tighten the connector on the rear brake caliper to the recommended torque.

- Fit the clip.

- Tighten the connector on the intermediate hose to the specified torque.

Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR

Op. 0010T66 MANUAL GEARBOX OIL CHECK LEVEL AND TOP UP IF NECESSARY

- Remove the vehicle from the lift.

- Test the operation of the braking system.