Workshop Manuals Factory service & repair Fiat
Fiat Ulysse Factory Service Manual (2002-2010)02 · Specifications
02 · General

Pressure (with rubber cold)

Make
Fiat
Model
Ulysse Factory Service Manual
Year
2002–2010
Section
Rims and tyres › Pressure (with rubber cold)
SpecificationsPressure (with rubber cold)

PRESSURE (WITH RUBBER COLD)

2.0 16V2.0 16V JTD2.2 16V JTD3.0 V6 24V AT
Tyre205/65 R15215/65 R15215/65 R15215/60 R16
Light load (bar)*Front2,52,42,42,4
Light load (bar)*Rear2,52,42,42,4
Heavy load (bar)*Front2,52,42,42,4
Heavy load (bar)*Rear3,23,03,03,0

VAN versions

2.0 16V2.2 16V JTD
Tyre205/65 R15215/65 R16215/60 R16
Light load (bar)*Front2,52,5
Light load (bar)*Rear2,52,5
Heavy load (bar)*Front2,52,5
Heavy load (bar)*Rear3,23,4

When the tyre is warm the inflation pressure should be + 0.3 compared with the recommended figure.

With winter tyres the pressure should be +0.2 bar compared with the recommended figure for the tyres that comes with the vehicle.

Valid for versions from 02-2004

2.0 16V2.0 16V JTD2.2 16V JTD3.0 V6 24V AT
Front suspensionCamber (angles cannot be adjusted)12° 24” ± 40’12° 24” ± 40’12° 24” ± 40’12° 24” ± 40’
Caster (angles cannot be adjusted)3° 30”± 30’3° 30”± 30’3° 30”± 30’3° 30”± 30’
Camber (angles cannot be adjusted)0° ± 30’0° ± 30’0° ± 30’0° ± 30’
Toe in2 ± 1 mm2 ± 1 mm2 ± 1 mm2 ± 1 mm
Toe in (°)0° 18’ ± 10’0° 18’ ± 10’0° 18’ ± 10’0° 18’ ± 10’
Rear suspensionCamber (angles cannot be adjusted)-1° 30’ ± 30’-1° 30’ ± 30’-1° 30’ ± 30’-1° 30’ ± 30’
Toe in5 ± 1 mm5 ± 1 mm5 ± 1 mm5 ± 1 mm
Toe in (°)0’ 44 ± 8’0’ 44 ± 8’0’ 44 ± 8’0’ 44 ± 8’

Parts & tools for this job For 2002 Fiat Ulysse

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.