Aspire L4-81 1.3L SOHC (1994)
Brake On/Off Switch: Service and Repair
1. Disconnect battery ground cable.
2. Disconnect wiring from switch.
Fig. 5 Stop Light Switch Replacement
3. Remove locknut, then the switch from brake pedal support.
4. Reinstall switch and locknut, then adjust switch as follows:
5. Connect ohmmeter across switch terminals.
6. Rotate switch toward brake pedal until ohmmeter indicates infinite resistance.
7. Rotate switch toward brake pedal an additional 1/2 turn, then tighten locknut and reconnect wiring.