Bronco L6-300 4.9L VIN Y 1-bbl (1983)
ACTION:
It is recommended that a plastic toothpick, or equivalent tool, be used to remove 0-rings. Refer to Figure 1. Do not use the metal O-Ring Tool
(T71P-19703-C). Only plastic O-Ring Tool (F5VH-17B017-AA) is approved for O-ring removal.
OTHER APPLICABLE ARTICLES: 91-22-5, 93-6-5
SUPERSEDES: 93-15-5
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES: 208000, 208999
