Bronco L6-300 4.9L VIN Y 1-bbl (1983)
This information has been taken from EPA documents to address Ford specific applications and recommendations. Further EPA information on
ozone-depleting substances and regulations regarding its handling can be found on the Internet at World Wide Web site: http://www.epa.gov/ozone/
In 1994, EPA established the Significant New Alternatives Policy (SNAP) program to review alternatives to ozone-depleting substances like R-12. EPA
examines new substitutes for their ozone depleting, global warming, flammability, and toxicity characteristics. The SNAP process does not test these
substitutes for A/C system compatibility, reliability, durability, or performance.
Under the SNAP rule, each new refrigerant must be used in accordance with the following conditions:
1.
Unique Fittings - Each new refrigerant must be used with a unique set of fittings to prevent the accidental mixing of different refrigerants.
2.
Unique Equipment - Each refrigerant must have dedicated recovery/recycling equipment for that refrigerant.
3.
Labels - Whether a vehicle is originally designed to use a new refrigerant or is retrofitted, the technician must apply a detailed label giving specific
information about the alternative. This label covers up information about the old refrigerant and provides valuable details on the alternative and
how it was used. The technician is required to fill in their name, company performing the retrofit, address and the date retrofitted.
4.
Remove Original Refrigerant - The original R-12 must be removed from the system prior to charging with the new refrigerant. This will guarantee
that the largest amount of clean R-12 is available for use in vehicles that still need it.
