Bronco L6-300 4.9L VIN Y 1-bbl (1983)
Pinion Bearing Cups, Replace, FORD REMOVABLE CARRIER
Do not remove drive pinion bearing cups from the retainer unless cups are worn or damaged.
1.
Using suitable puller, remove bearing cups.
2.
Using tool T71P-4616-A or equivalent, install new bearing cups.
3.
Check seating of cups by attempting to insert a .0015 inch feeler gauge between cup and bottom of bore. Cone and roller assemblies should be
replaced whenever cups are replaced.
Selecting Correct Pinion Shim, FORD REMOVABLE CARRIER
Fig. 5 Removable carrier 9 inch ring gear axle pinion depth tool gauge
