Bronco L6-300 4.9L VIN Y 1-bbl (1983)
FIGURE 33
7.
Using a 5/8" diameter hole saw, drill (4) holes in tailgate inner panel at four template hole locations (Figure 33, Views 3 and 3A).
8.
Clean drillings from area.
9.
Using each drilled access hole, remove the (4) glass bracket retainer nuts.
10.
Using undersize 5/16" drill punch, remove glass bracket "C" channel from glass and glass bracket to separate tailgate glass (Figure 33, View 4).
11.
Remove protective cover and drillings.