Bronco Full Size V8-351 5.8L (1987)
![background image](/ford/bronco_full_size/v8-351_5.8l/Page-8002.png)
Figure 10
1.
Measure temperature sender resistance (at sender), Figure 8. If the resistance is greater than 12.0 ohms, replace the warning module.
2.
Measure the oil sender resistance (at sender), Figure 8. If the resistance is less than 51.0 ohms, replace the warning module.
NOTE:
Refer to the appropriate Shop Manual and Figures 9 and 10 for the removal and installation of the module.
OTHER APPLICABLE ARTICLES:
None
WARRANTY STATUS:
"INFORMATION ONLY"