Alignment (Camber): Specifications
- Make
- Ford
- Model
- Bronco II 2WD
- Engine
- V6-177 2.9L
- Year
- 1986
- Section
- Alignment › Specifications › Camber
Alignment: Specifications
Camber
Camber
Note: Side to side camber readings must be within .7 deg,
when truck frame to axle riding height is within .12 inch
side to side.
Forged Axle
Ride Height
3.03 in
-1 to -3/4 deg
3.23 in
-1 to -1/4 deg
3.43 in
-1 to + 1/8 deg
3.5 in
-1 to + 1/4 deg
3.62 in
-5/8 to +5/8 deg
3.82 in
-1/8 to +1 1/8 deg
4.02 in
+3/8 to +1 5/8 deg
4.41 in
+1 3/8 to +2 3/4 deg
Camber
Note: Side to side camber readings must be within .7 deg.,
when truck frame to axle riding height is within .12 inch
side to side.
Stamped Axle
Ride Height
2.75 in
-1 to -3/4 deg
2.95 in
-1 to -1/4 deg
3.15 in
-1 to +1/8 deg
3.35 in
-5/8 to +5/8 deg
3.55 in
-1/8 to +1 1/8 deg
3.75 in
+3/8 to +1 5/8 deg
3.95 in
+7/8 to +2 1/8 deg
4.15 in
+1 3/8 to +2 3/4 deg
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 1986 Ford Bronco 2.9L
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Ford power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.