ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Power Steering Pump - Vehicles With: Electro-Hydraulic Power Steering (EHPS) > < Power Steering Pump - 1.6L Duratec-16V (Sigma)

C-MAX 2003.75 (06.2003-)

Power Steering - Steering Gear Bushing C-MAX 2003.75 (06/2003-)
Removal and Installation

Special Tool(s)

Installer, Wheel Hub

204-148 (14-037)

Remover/Installer, Pivot Bushing

205-297 (15-086)
General Equipment
Vise jaw protectors
Materials
Name
Specification
Rubber suspension insulator lubricant
E25J-19553-A 

Removal

  1. Remove the steering gear.
    For additional information, refer to Steering Gear - 1.8L/2.0L/1.6L Diesel/2.0L Diesel in this section.

  1. CAUTION:
    CAUTION:Make sure vise jaw protectors are used.
    CAUTION:
    CAUTION:Clamp the steering gear reinforcement boss. Do not clamp the steering gear body.
    Secure the steering gear in a vise.

  1. Using the special tools remove the steering gear bushing on both sides.

Installation

  1. Lubricate the steering gear bushings with rubber suspension insulator lubricant.

  1. Using the special tools install the steering gear bushing on both sides.
  1. Install the steering gear.
    For additional information, refer to Steering Gear - 1.8L/2.0L/1.6L Diesel/2.0L Diesel in this section.

Power Steering Pump - Vehicles With: Electro-Hydraulic Power Steering (EHPS) > < Power Steering Pump - 1.6L Duratec-16V (Sigma)