ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Starter Motor - 1.6L Duratec-16V Ti-VCT (Sigma) > < Starting System

C-MAX 2003.75 (06.2003-)

Starting System - Starter Motor—1.6L Duratec-16V (Sigma) C-MAX 2003.75 (06/2003-)
Removal and Installation

  1. Disconnect the battery ground cable.
    For additional information, refer to: Battery Disconnect.
  1. Remove the air cleaner.
    For additional information, refer to: Air Cleaner - 1.6L.

  1. Remove the starter motor retaining bolt.

4. Remove the components in the order indicated in the following illustration(s) and table(s).

 
Item
Part Number
Description
1
-
Battery to starter motor solenoid cable electrical connector retaining nut
2
-
Ignition switch to starter motor solenoid cable electrical connector retaining nut Battery to starter motor solenoid cable electrical connector retaining nut
3
-
Starter motor electrical connector
See Removal Detail
4
-
Starter motor upper retaining bolt
5
-
Starter motor lower retaining bolt
See Removal Detail
6
-
Starter motor

5. To install, reverse the removal procedure.

  1. Initialize the door window motors. For additional information, refer to Section  501-11 Glass, Frames and Mechanisms.

Removal Details

Item 3 : Starter motor electrical connector
  1. Detach the starter motor electrical connector.

Item 5 : Starter motor lower retaining bolt

  1. Support the starter motor.

Starter Motor - 1.6L Duratec-16V Ti-VCT (Sigma) > < Starting System