| Removal and Installation Worldwide Diagnostic System (WDS) | | -
Remove the passenger side front seat.
For additional information, refer to: Front Seat (501-10 Seating, Removal and Installation).
| 2. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - CD changer retaining screws CAUTION:Make sure that the horizontal/vertical orientation setting on the CD changer is in the horizontal position. Failure to follow this instruction may result in internal damage to the CD changer. NOTE:Before installing a new CD changer, remove the CD changer transportation retaining clips. NOTE: When installing a new CD changer, the CD changer must be configured by selecting the Programmable Module Installation Routine on WDS. | | -
To install, reverse the removal procedure. | Removal Details Item 2 : CD changer electrical connector | | -
Disconnect the CD changer electrical connector. | | 
