Removal and Installation 2. Remove the components in the order indicated in the following illustration(s) and table(s). 3 - Liftgate latch electrical connector 3. To install, reverse the removal procedure. Removal Details Item 4 : Liftgate latch remote control cable to liftgate lock cylinder housing | -
CAUTION:Make sure the liftgate latch remote control cable is not kinked during the removal. Failure to follow this instruction may cause damage to the cable. CAUTION:Make sure the liftgate lock cylinder housing clips are not damaged during the removal of the cable. Failure to follow this instruction may cause damage to the liftgate lock cylinder housing. Disconnect the liftgate latch remote control cable from the liftgate lock cylinder housing. - Detach the liftgate latch remote control cable from the retaining clip.
- Disconnect the liftgate latch remote control cable from the liftgate lock cylinder clip and remove the cable.
| Item 5 : Liftgate latch and motor CAUTION:When removing the liftgate latch and motor, take care not to kink or stretch the liftgate latch remote control cable. | -
Feed the liftgate remote control cable through the liftgate latch aperture. | Installation Details Item 5 : Liftgate latch and motor CAUTION:When installing the liftgate latch and motor, take care not to kink or stretch the liftgate latch remote control cable. | -
Feed the liftgate remote control cable through the liftgate latch aperture. | Item 2 : Liftgate trim panel retaining clips | -
Install the liftgate trim panel retaining clips to the liftgate trim panel. | |