ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Door Lock Cylinder > < Ignition Lock Cylinder

C-MAX 2003.75 (06.2003-)

Handles, Locks, Latches and Entry Systems - Liftgate Release Handle C-MAX 2003.75 (06/2003-)
Removal and Installation

1. Remove the components in the order indicated in the following illustration(s) and table(s).

 
Item
Part Number
Description
1
-
Liftgate trim panel
2
-
Liftgate trim panel retaining clips
See Installation Detail

 
Item
Part Number
Description
3
-
Liftgate release switch electrical connector
4
-
Liftgate release handle sealing pads
5
-
Licence plate illumination panel retaining nuts
6
-
Licence plate illumination electrical connectors
7
-
Licence plate illumination panel
See Removal Detail
See Installation Detail
8
-
Liftgate release handle

2. To install, reverse the removal procedure.

Removal Details

Item 7 : Licence plate illumination panel

  1. Feed the liftgate release switch electrical cable through the liftgate panel.

Installation Details

Item 7 : Licence plate illumination panel

  1. NOTE:
    NOTE:Make sure the licence plate illumination panel and liftgate panel surfaces are clean and free from dirt and grime before installation.
    Feed the liftgate release switch electrical cable through the liftgate panel. Make sure the liftgate release switch electrical cable rubber grommet is securely installed into the liftgate panel.

Door Lock Cylinder > < Ignition Lock Cylinder