| Removal and Installation | | -
Remove the headlamps.
For additional information, refer to: Headlamp Assembly (417-01 Exterior Lighting, Removal and Installation).
| 2. Remove the components in the order indicated in the following illustration(s) and table(s). 5 - Fog lamp electrical connectors (if equipped) 3. To install, reverse the removal procedure. Removal Details Item 1 : Air deflector | | -
Remove the air deflector. | Item 2 : Radiator grille | | -
Detach the hood lock from the radiator grille. - Release the clip.
- Detach the hood lock.
| Item 3 : Headlamp washers (if equipped) | | -
Remove the headlamp washer on both sides (left-hand side shown). - Pull the headlamp washer forwards to access the clip.
- Using a suitable screwdriver, release the clip.
| Item 4 : Fender splash shield retaining screws | | -
Raise and support the vehicle. For additional information, refer to: (100-02 Jacking and Lifting) Jacking (Description and Operation), Lifting (Description and Operation). | Item 6 : Parking aid sensors (if equipped) | | -
For additional information, refer to: Front Parking Aid Sensor (413-13A Parking Aid - Vehicles With: Front Parking Aid, Removal and Installation).Detach the parking aid sensors from the bumper cover. | Item 7 : Bumper cover | | -
Detach the bumper cover from the fender on both sides (right-hand side shown). | | | -
Remove the upper pushpin retainer on both sides (right-hand side shown). | | | -
NOTE:Bumper cover shown removed for clarity. Detach the bumper cover from the radiator grille opening panel reinforcement. | | | -
Detach the bumper cover from the radiator splash shield. - Remove the lower pushpin retainers.
- Release the clips.
| Installation Details Item 6 : Parking aid sensors (if equipped) | | -
For additional information, refer to: Front Parking Aid Sensor (413-13A Parking Aid - Vehicles With: Front Parking Aid, Removal and Installation). | |
