Removal and Installation | -
Raise and support the vehicle. For additional information, refer to: Jacking (100-02 Jacking and Lifting, Description and Operation) / Lifting (100-02 Jacking and Lifting, Description and Operation). | 2. Remove the components in the order indicated in the following illustration(s) and table(s). 3 - Bumper cover retaining bolt covers 3. To install, reverse the removal procedure. Removal Details Item 1 : Fender splash shield retaining screws | -
Detach the bumper cover from the fender splash shield on both sides. - Remove the mudflap (if equipped).
| Item 2 : Bumper cover retaining nuts | -
Detach the bumper cover from the fender on both sides. - Remove the retaining nut.
- Detach the clip.
| Item 4 : Bumper cover retaining bolts | -
Detach the bumper cover from the bumper bracket on both sides. - Remove the retaining bolt.
- Detach the clip.
| Item 5 : Parking aid sensors (if equipped) | -
For additional information, refer to: Rear Parking Aid Sensor (413-13B Parking Aid - Vehicles With: Rear Parking Aid, Removal and Installation).Detach the parking aid sensors from the bumper cover. | Item 6 : Bumper cover Installation Details Item 5 : Parking aid sensors (if equipped) | -
For additional information, refer to: Rear Parking Aid Sensor (413-13B Parking Aid - Vehicles With: Rear Parking Aid, Removal and Installation). | |