ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

PCM - Engine Spark Knock While Accelerating|Page 107 > < Engine - Hesistation When Accelerating|Page 97
Page 1
background image

Technical Service Bulletin # 00-10-3

Date: 000515

PCM - Engine Spark Knock While Accelerating

Article No.
00-10-3

05/15/00

SPARK KNOCK - WHILE ACCELERATING IN 
TEMPERATURES OF 32 DEGREES C (90 DEGREES 
F)

FORD:
1998-1999 CROWN VICTORIA 

MERCURY:
1998-1999 GRAND MARQUIS

ISSUE
A spark knock may occur while accelerating in ambient temperatures greater than 32C (90F) on some vehicles. This may be caused by an inoperative
cooling fan and/or too much spark advance commanded by the calibration when operating in high ambient temperatures.

ACTION
Check the operation of the high and low speed cooling fans, and if necessary reprogram the Powertrain Control Module (PCM) and/or adjust the timing
using NGS. Refer to the following Service Procedure for details.

Obtain an Authorized Modifications Decal (FPS 8262 - obtainable through DOES II, 25/pkg) and list the date, dealer number, and summary of
modifications performed. Select a prominent place adjacent to the Vehicle Emission Control Information Decal suitable for installing the Authorized
Modifications Decal. Clean the area, install the decal, and cover it with a clear plastic decal shield.

OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage

OPERATION

DESCRIPTION

TIME

001003A

Reprogram Powertrain

1.3 Hrs.

Control Module (PCM),
Perform Octane Adjust
Procedure And Check
Operation Of Cooling Fans
(Also Includes Time To
Test Drive To Check For
Spark knock)

DEALER CODING

CONDITION

BASIC PART NO.

CODE

RECAL

42

OASIS CODES: 497000, 615000, 615500, 615600, 702000, 702100

PCM - Engine Spark Knock While Accelerating|Page 107 > < Engine - Hesistation When Accelerating|Page 97