Crown Victoria V8-281 4.6L SFI (1998)
Wheel Bearing: Service and Repair
REMOVAL
1. Raise vehicle on hoist.
2. Remove wheel and tire assembly.
3. Remove front hub cap grease seal from wheel hub and discard.
4. Remove two disc brake caliper bolts that mount disc brake caliper assembly to spindle and discard.
CAUTION: Do not let disc brake caliper hang by the front brake hose. Damage to front brake hose may result.
5. Remove disc brake caliper assembly and suspend with wire.
6. Remove front disc brake rotor. If factory push-on nuts are installed, remove clips first.
7. Remove front axle wheel hub retainer and discard.