Crown Victoria V8-281 4.6L SFI (1998)
8. Remove wheel hub assembly. If assembly cannot be removed by hand, use Front Hub Remover/Replacer T81P-1104-C.
INSTALLATION
1. Install wheel hub.
2. Install new front axle wheel hub retainer and tighten to 255-345 Nm (189-254 ft. lbs.).
3. Install front disc brake rotor and push-on nuts.
4. Install new front hub cap grease seal. Use appropriate tool so as not to damage or distort front disc brake rotor.
5. Position disc brake caliper to front disc brake rotor and front wheel spindle.
6. Install new disc brake caliper mounting bolts. Tighten to 200 Nm (147 ft. lbs.).
7. Install wheel and tire assembly. Tighten lug nuts to 115-142 Nm (85-104 ft. lbs.).
8. Lower vehicle.