Crown Victoria V8-4.6L Flex Fuel (2008)
3. Install the 2 roof opening panel support strap bolts.
-
Tighten to 10 Nm (89 lb-in).
4. Connect the roof opening panel motor electrical connector.
5. Position the roof opening panel motor wiring harness.
-
Attach the 5 wiring harness retaining clips.
-
Install the tie strap.
6. Connect the 2 front and 2 rear drain hoses.
7. Install the headliner.
8. Align the roof opening panel glass. For additional information, refer to Roof Opening Panel Alignment. See: Adjustments
9. Initialize the roof opening panel motor. For additional information, refer to Roof Opening Panel Motor Initialization. See: Testing and
Inspection/Programming and Relearning