Crown Victoria V8-4.6L SOHC VIN 6 (1996)
7.
Check clearance between brake lines and the floor pan as shown in Figure 4.
8.
If necessary, rework brake lines on vehicle to make sure that there is an 8 mm to 12 mm clearance between the floor pan and the brake lines. Also,
make sure that there is no contact between any of the lines.
9.
Lower vehicle.
10.
Turn air suspension switch On, if equipped.
BRAKE LINE REPLACEMENT
There are no prefabricated brake lines for this procedure. A length of straight brake line must be cut, flared and bent to fix the vehicle.