Crown Victoria V8-4.6L SOHC VIN 6 (1996)
Installation
1. If a new parking brake control assembly is to be installed proceed to Step 2. When installing the same control assembly, fabricate a metal tool as
shown, and place it between the parking brake take up spring tang and mounting bracket, making sure the pedal is fully released. This will aid in
connecting the parking brake cable to the reel on the parking brake control.
WARNING: KEEP FINGERS AWAY FROM REEL MECHANISM WHILE TOOL IS IN PLACE.
2. Position parking brake control and connect control cable.
3. Install parking brake control-to-body side cowl and install three retaining bolts. remove shipping block or clip from parking brake control with
pliers.