Crown Victoria V8-4.6L SOHC VIN 6 (1996)
7. Partially remove scuff plate and partially remove door weatherstrip.
8. Remove instrument panel center moldings (RH and LH) to gain access to lower steering column cover.
9. Remove lower steering column cover retaining bolts and remove cover.
10. Remove steering column-to-parking brake control shake brace.
11. Remove EEC-IV microprocessor.
12. Remove parking brake vacuum motor.
13. Remove LH cowl side trim panel.
14. Remove fuse panel retaining nuts and position aside to gain working room.
15. Remove LH lower instrument panel retaining bolts.
NOTE: It will be necessary to pull and retain the instrument panel rearward slightly by installing a small block of wood or similar tool between
the instrument panel and the body.
16. Remove parking brake control retaining bolts.
17. Lower parking brake control, and disconnect the cable from parking brake control reel.
