Crown Victoria V8-4.6L SOHC VIN 6 (1996)
37. Rotate crankshaft counterclockwise 45 degrees from toe.
CAUTION: Crankshaft must be in this position prior to rotating camshafts or damage to pistons and/or valve train will result.
NOTE: This ensures that all pistons are below the top of the engine block deck face.
38. Install Valve Spring Compressor T91P-6565-A, under camshaft and on top of valve spring retainer.
NOTE: A Valve Spring Spacer T91P-6565-AH must be installed between spring coils and camshaft must be at base circle before compressing
valve spring. Rotate camshaft as required until all roller followers are removed.
39. Compress valve spring far enough to remove roller follower.
40. Repeat Steps 38 and 39 until all roller followers are removed.