Crown Victoria V8-4.6L SOHC VIN 6 (1996)
^
Updated Price Book
EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.
CLAIMS PREPARATION
Enter using DWE. Use code information shown below
^
Program Code: 97M91
^
Labor Operation: See Above
See Sections 5 & 6 of the ACESII manual for detailed instructions.
Affected Vehicles
INTAKE MANIFOLD INSPECTION/REPLACEMENT
AFFECTED VEHICLES:
1996-1998 CROWN VICTORIA TAXI VEHICLES WITH 4.6L SOHC ENGINES BUILT AT THE ST. THOMAS ASSEMBLY PLANT FROM
AUGUST 8, 1995 THROUGH NOVEMBER 22, 1997.
1996-1998 TOWN CAR LIMO PREP AND LIVERY PACKAGE VEHICLES WITH 4.6L SOHC ENGINES BUILT AT THE WIXOM ASSEMBLY
PLANT FROM JOB # 1, 1996 THROUGH NOVEMBER 22, 1997.
1996-1997 THUNDERBIRD AND COUGAR VEHICLES WITH 4.6L SOHC ENGINES BUILT AT THE LORAIN ASSEMBLY PLANT FROM
JULY 31, 1995 THROUGH JUNE 24, 1997.
1996-1997 MUSTANG VEHICLES WITH 4.6L SOHC ENGINES BUILT AT THE DEARBORN ASSEMBLY PLANT FROM AUGUST 1, 1995
THROUGH JUNE 24, 1997.
Inspection
INSPECTION
Inspect intake manifold in area shown in Figure 1 for coolant seepage. If seepage is present, the intake manifold must be replaced. If seepage is not
present, no service action is required.
