Crown Victoria V8-4.6L SOHC VIN 6 (1996)
INTAKE MANIFOLD REPLACEMENT
NOTE:
THE FIGURES ILLUSTRATED IN THE FOLLOWING TECHNICAL INSTRUCTIONS REPRESENT A 1997 CROWN VICTORIA EQUIPPED
WITH A 4.6L SOHC ENGINE. THE 1996 AND 1998 MODEL YEAR VEHICLES ARE SIMILAR. REFER TO THE APPROPRIATE MODEL
YEAR SERVICE MANUAL FOR ADDITIONAL DETAILS.
Removal
REMOVAL
1.
Install memory saver, then disconnect battery ground cable.
2.
Remove cover from throttle body.
3.
Drain cooling system.
4.
Relieve fuel system pressure as follows:
^
Connect Multiport Fuel Injection (MFI) Fuel Pressure Gauge T80L-9974-B to fuel pressure relief valve on the fuel supply manifold.
^
Open manual valve on gauge to relieve fuel system pressure.
^
Remove gauge from relief valve.
5.
Remove air cleaner outlet tube.
6.
If equipped with ignition wires, disconnect the ignition wires from spark plugs and routing clips. If equipped with a coil-on-plug system,
disconnect and remove individual coils from each cylinder.
7.
Remove PCV valve and hose from engine.
