Crown Victoria V8-4.6L SOHC VIN 6 (1996)
8.
Disconnect fuel charge wiring harness from right side fuel injectors, Engine Coolant Temperature (ECT) sender and EGR Vacuum Regulator
(EVR) solenoid.See Figure 2. Position right side fuel charge wiring harness away from intake manifold.
9.
Disconnect heater hose from right rear corner of intake manifold. See to Figure 3.
10.
Remove throttle/speed control cable routing bracket. See to Figure 3.
11.
Disconnect EGR tube from EGR valve. See to Figure 3.
12.
Disconnect vacuum line from EVAP solenoid. See Figure 3.
13.
Disconnect two (2) vacuum lines from top of throttle body adapter.
