ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 9395 > < Initial Inspection and Diagnostic Overview|Page 9393
Page 7
background image

NO

REPLACE lighting control module.  RESTORE vehicle.  RETEST system.

EA - No Communication With Lighting Control Module

Pinpoint Test EA: No Communication With Lighting Control Module

EA1 - Check Circuit 195 (T/W) For Power

-

Disconnect lighting control module connector C3.

-

Using a voltmeter, measure for voltage at lighting control module connector pin C3-6, circuit 195 (T/W).

Is voltage B+?

YES

GO to EA5.

NO

GO to EA2.

EA2 - Check Circuit 195 (T/W) For Short To Ground

-

Remove fuse 4 (15A) from fuse junction panel.

-

Using an ohmmeter connected to ground, measure resistance at lighting control module connector pin C3-6, circuit 195 (T/W).

Is resistance less than 10K ohms?

YES

SERVICE circuit 195 (T/W) for short to ground. REPLACE fuse 4 (15A). RESTORE vehicle. RETEST system.

NO

GO to EA3.

EA3 - Check Supply To Fuse 4 (15A)

-

Remove fuse 4 (15A) from fuse junction panel.

-

Using a voltmeter, measure for voltage at fuse 4 input cavity.

-

Is voltage B+?

YES

GO to EA4.

NO

SERVICE supply to fuse 4 (15A) RESTORE vehicle. RETEST system.

EA4 - Check Circuit 195 (T/W) For Open

-

Using an ohmmeter, measure resistance of circuit 195 (T/W) between lighting control module connector pin C3-6 and output cavity of fuse 4
(15A).

Is resistance 5 ohms or less?

YES

REPLACE fuse 4 (15A). RESTORE vehicle. RETEST system.

NO

SERVICE circuit 195 (T/W) for open. RESTORE vehicle. RETEST system. 

EA5 - Check Circuit 54 (LG/Y) For Power

-

Disconnect lighting control module connector C3.

-

Using a voltmeter, measure for voltage at lighting control module connector pin C3-11, circuit 54 (LG/Y).

Is voltage B+?

YES

GO to EA9.

NO

GO to EA6.

EA6 - Check Circuit 54 (LG/Y) For Short To Ground

-

Remove fuse 8 (15A) from fuse junction panel.

-

Using an ohmmeter connected to ground, measure resistance at lighting control module connector pin C3-11, circuit 54 (LG/Y).

Is resistance less than 10K ohms?

YES

SERVICE circuit 54 (LG/Y) for short to ground. REPLACE fuse 8 (15A). RESTORE vehicle. RETEST system.

NO

GO to EA7.

EA7 - Check Supply To fuse 8 (15A)

Initial Inspection and Diagnostic Overview|Page 9395 > < Initial Inspection and Diagnostic Overview|Page 9393