Crown Victoria V8-4.6L SOHC VIN 6 (1996)
3.
Verify that the plastic windlatch slide is positioned so that it can move an equal distance beyond both ends of the depressed park windlatch guide
bracket. Make sure the tab on the windlatch is oriented in the proper direction for the specific application (Figure 1, views A and C).
4.
Apply a thin film of Silicone Brake Caliper Grease (Motorcraft Part XG-3-A) to the mating surfaces of the plastic windlatch slide and the output
arm.
5.
Install the output arm onto the wiper motor output shaft according to the specific application (Figure 1, views B and D).
