ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Brake Master Cylinder|Page 5346 > < Brake Master Cylinder|Page 5344
Page 1
background image

Brake Master Cylinder: Service and Repair
Brake Fluid Reservoir

Brake Fluid Reservoir

Material 

Removal

WARNING:  Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15-minutes. Get medical attention if irritation persists. If taken internally, drink
water and induce vomiting. Get medical attention immediately.

1. Disconnect the brake master cylinder fluid level switch.
2. Use a suitable suction device to drain the brake master cylinder reservoir.

3. Carefully pry up on the brake master cylinder reservoir and remove.

Installation

1. NOTE:  Whenever installing a brake master cylinder reservoir, install new grommets.

Brake Master Cylinder|Page 5346 > < Brake Master Cylinder|Page 5344