Crown Victoria V8-4.6L SOHC VIN W (2005)
Install the brake master cylinder reservoir.
1. Lubricate the two grommets with High Performance DOT 3 Brake Fluid PM-1 or equivalent fluid meeting Ford specification ESA-M6C25A.
Insert the grommets into the brake master cylinder.
2. Press the brake master cylinder reservoir into the grommets until it is fully seated.
3. Connect the brake master cylinder fluid level switch.
4. Fill the brake master cylinder reservoir with clean High Performance DOT 3 Brake Fluid PM-1 or equivalent fluid meeting Ford specification
ESA-M6C25A.
