Crown Victoria V8-4.6L SOHC VIN W (2005)
Air Door Actuator / Motor: Service and Repair
Temperature Blend Door Actuator
TEMPERATURE BLEND DOOR ACTUATOR
REMOVAL AND INSTALLATION
1. Remove the instrument panel. Refer to: Body and Frame, Interior Moulding/Trim, Dashboard/Instrument Panel, Service and Repair, Removal and
Installation, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Installation
2. Disconnect the connector.
3. Remove the four screws.
4. Remove the temperature blend door actuator.
5. To install, reverse the removal procedure.
