Crown Victoria V8-4.6L SOHC VIN W (2005)
5. Disconnect the climate control assembly.
1. Disconnect the electrical connectors.
2. Disconnect the vacuum line connector.
6. To install, reverse the removal procedure.
Electronic Automatic Temperature Control
Climate Control Assembly - EATC
Removal and Installation
1. Depower the supplemental restraint system (SRS). Refer to Restraint Systems, Air Bag Systems, Air Bag(s) Arming and Disarming See: Restraint
Systems/Air Bag Systems
2. Remove the finish panel.
3. Disconnect the connector.
4. Remove the screws and pull the electronic automatic temperature control (EATC) module from the instrument panel.