Crown Victoria V8-4.6L SOHC VIN W (2005)
4. Remove the driver side B-pillar weatherstripping.
5. Pull out to release the retaining clips and remove the driver side B-pillar lower trim panel.
6. NOTE: The side impact sensor bolts must be removed in the sequence shown.
Remove the side impact sensor with bracket.
1
Disconnect the electrical connector.
2
Remove the bolt.
3
Remove the bolt.
4
Remove the side impact sensor with bracket.
Installation
1. WARNING: The tightening torque of the air bag side impact sensor retaining bolts is critical for correct system operation.