Crown Victoria V8-4.6L SOHC VIN W (2005)
9. Move the Watts link upwards and detach the lateral arms.
^
Remove the Watts link and LH lateral arm.
10. CAUTION: Do not use excessive force when removing the RH lateral arm-to-frame pivot bolt or damage to the air spring can occur.
Remove the RH lateral arm-to-frame nut and bolt and remove the arm.
^
Discard the nut
11. Remove and discard the Watts link pivot stud.
12. CAUTION: If the height sensor bracket is detached from the LH lateral arm, the rear ride height must be adjusted.
If necessary, remove the nuts and the height sensor bracket
