E 150 V8-4.6L SOHC VIN W (2004)
and check for any leaks. If fluid is needed, add fluid in increments of 0.24-liter (0.5-pint) until the correct level is achieved (fluid should be in the
cross-hatched area of the fluid level indicator).
Vehicles equipped with a fluid pan and torque converter drain plug
Draining
1. With the vehicle in NEUTRAL, position on a hoist.
2. Remove the drain plug and allow the fluid to drain.
3. Remove the torque converter drain plug cover.
4. Remove the torque converter drain plug and discard.
5. Allow the fluid to drain.
6. NOTE: If equipped with a radiator in-tank transmission fluid cooler or an auxiliary cooler, the coolers will need to be flushed.
Only flush the cooler tubes, fluid coolers and the bypass valve if carrying out a transmission overhaul.
Refill
