Workshop Repair Manuals

Ford Workshop Manuals

[PREV PAGE] [NEXT PAGE]

ford Workshop Repair Guides


E 150 V8-4.6L SOHC VIN W (2004)

Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Technical Service Bulletins > Recalls for Electronic Brake Control Module: > 04S22S1 > Nov > 04 > Recall - ABS Module Replacement > Page 1618

Page 7
background image

4.

Remove the four (4) Torx head screws securing the ABS module to the HCU. See Figure 6.

5.

Lift the module slightly and position it so you can access and disconnect the ABS pump motor connector. Then disconnect the pump motor and
remove the module from the vehicle. See Figure 7.

6.

Install the ABS Module heat shield as follows:

a)

Clean the top of the ABS module with the alcohol pad provided in the service kit.

Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Technical Service Bulletins > Recalls for Electronic Brake Control Module: > 04S22S1 > Nov > 04 > Recall - ABS Module Replacement > Page 1618

[PREV PAGE] [NEXT PAGE]