Ford Workshop Manuals
E 150 V8-4.6L SOHC VIN W (2004)
Sensors and Switches > Sensors and Switches - Starting and Charging > Ignition Switch > Ignition Switch Lock Cylinder > Component Information > Service and Repair > Ignition Lock Cylinder - Functional > Page 2493
5. NOTE: Thoroughly clean all the drill shavings from the steering column and inspect for damage.
Remove the bearing and the gear.
1. NOTE: Use a new ignition switch lock cylinder.
To install, reverse the removal procedure.
Verify ignition switch lock cylinder operation.
|[PREV PAGE] [NEXT PAGE]|